Contact Us

Wuxi Chunlei Transport Machinery Factory
Contact: Jiang Yiqing 13706199709
Jiang Yun 18651588885
Tel:0510-85225573、85215116
Fax:0510-85214984
Code:214028
Corporate Email:wxcl@wxchunlei.cn
Tech Dept. Email:wxjsk@wxchunlei.cn
Office Address: Rooms 903 & 904, Block B, Jinyuan International Mansion, No. 2-2 Xiangjiang Road, Xinwu District, Wuxi
Factory Address: Beishi Road, Huangtusi Village, North Industrial Park, Wanshi Town, Yixing City
Webiste: www.wxchunlei.cn

Bucket lifter series

Our bucket lifter series D, TD, HL, TH, NE are popular by users. Series TD and TH own advantages such as more specifications, larger transportation volume, higher lifting height, steadier running and longer lifespan etc. whose main performance and parameters are in accordance with Vertical Bucket Lifter J8/T3926-99 (This standard refers to international standard and advanced foreign standards).(一) HL and TH series drawing ring chain are in accordance with High-strength Ring Chain for Mine MT36-80.NE series chain lifter is produced with introduced advanced foreign technology.
This lifter is suitable for transporting non-grinding or small-grinding loose materials of powder, grains and small block such as sand, cement, coal, coke powder, gravel, clay, ore etc. The temperature of materials transported by series D and TD should be less than 60C or less than 150C if adopting heat-resistant adhesive belt. The series TH and HL could transport high-temperature materials because the drawing system of lifter adopts circle chain.

Mode D160 D250 D350 D450 TD160 TD250 TD315 TD400 TD500 TD630
Bucket form Q S Q S Q S Q S Q H ZD SD Q H ZD SD Q H ZD SD Q H ZD SD Q H ZD SD H ZD SD
transportation volume m³/h 4.7 18 22 38 42 70 72 5.4 9.6 16 38 70 58 92 85 89 142
Widtd of bucket(liter) 160 250 350 450 160 250 315 400 500 630
Volume of Bucket(liter) 0.65 1.1 2.6 3.2 7 7.8 14.5 15 0.5 0.9 1.2 1.9 1.3 2.2 3 4.6 2 3.6 3.8 5.8 3.1 5.6 5.9 9.4 4.8 9 9.3 15 14 14.6 23.6
Pitch of bucket mm 300 400 500 640 280 350 360 450 400 500 480 560 500 625 710
Belt widtd mm 200 300 400 500 200 300 400 500 600 700
Bucket speed m/s 1 1.25 1.25 1.25 1.4 1.6 1.6 1.8 1.8 2
Max. material block mm 25 35 45 55 25 35 45 55 60 70

Notes: 1. The bucket capacity listed in the table is calculated capacity. The conveying capacity is calculated based on a filling factor of 0.6.

Application of buckets for bucket elevators: Shallow buckets: For conveying moist, easily agglomerated and hard-to-discharge materials, such as wet sand, wet coal, etc. Deep buckets: For conveying dry, loose and easy-to-discharge materials, such as cement, coal lumps, broken stone, etc.

TH and HL Series Chain Bucket Elevators

Mode HL300 HL400 td315 td400 td500 td630 td800 td1000
Bucket form Q S Q S ZH SH ZH SH ZH SH ZH SH ZH SH ZH SH
Conveying Capacity: m³/h 16 28 30 47 21 36 36 56 45 70 68 110 87 141 141 220
Widtd of bucket(liter) 300 400 315 400 500 630 800 1000
Volume of Bucket(liter) 4.4 5.2 10 10.5 3.75 6 5.9 9.5 9.3 15 14.6 23.6 23.3 37.5 37.6 58
Pitch of bucket mm 512 512 512 512 688 688 920 920
Chain specification 18×64 18×64 18×64 18×64 22×86 22×86 26×92 26×92
Sprocket section diameter mm 630 630 630 710 800 900 1000 1260
Bucket speed m/s 1.4 1.4 1.4 1.4 1.5 1.5 1.6 1.6
Max. material block mm 40 50 45 55 65 75 85 100

Notes:
1. The bucket capacities shown in the table are calculated values. For Q-type buckets, the conveying capacity is calculated with a filling factor of 0.4; for other types of buckets, the filling factor is 0.5.
2. Application of buckets for HL bucket elevators:
Q – Shallow round-bottom bucket: Used for conveying moist, easily agglomerated and hard-to-discharge materials, such as wet sand, wet coal, etc.
S – Deep round-bottom bucket: Used for conveying dry, loose and easy-to-discharge materials, such as cement, coal lumps, crushed stone, etc.

NE Series Chain Bucket Elevators

Mode NE15 NE30 NE50 NE100 NE150 NE200 NE300 NE400 NE500 NE600 NE800
Lifting capacity M³/h 16 31 60 110 165 220 320 441 470 600 800
Max. material block mm Allowable percentage% 10 65 90 90 130 130 170 170 205 240 240 275
25 50 75 75 105 105 135 135 165 190 190 220
50 40 58 58 80 80 100 100 125 145 145 165
75 30 47 47 65 65 85 85 105 120 120 135
100 25 40 40 55 55 70 70 90 100 100 110